Davies Epoxy Enamel

Non-toxic White

DAVIES® Epoxy Enamel Non-toxic is a two-component, air drying, chemically-cured epoxy coating system specially formulated for steel and masonry surfaces. When fully cured, it is completely odorless, tasteless, and non-toxic. It exhibits excellent resistance to acid solution, brine, and other chemicals.

Type: Epoxy-Polyamide
Finish: Gloss
Color: White
Practical Coverage: 30-35 sqm / 4 liter / coat depending on surface porosity
Pack Size: 4 liters set

FEATURES

• Meets drinking water hygiene standards
• High solids content; high film thickness
• Very good water and abrasion resistance
• Excellent adhesion to properly prepared surfaces

RECOMMENDED USE

In food processing industries and potable water tanks.

PAINTING INSTRUCTIONS

Application Tools: Brush / Roller / Spray

Thinning:
Using brush/roller, use as is. If necessary, dilute with not more than 1/4 liter of DAVIES® 95 Epoxy Reducer per 4L DAVIES® Epoxy Enamel Non-toxic

Using a spray, dilute with not more than 1 liter of DAVIES® 95 Epoxy Reducer per 4L DAVIES® Epoxy Enamel Non-toxic

Mixing Direction:
Mix 3 volume parts of DAVIES® Epoxy Enamel Non-toxic Base to 1 volume part of DAVIES® Epoxy Enamel Non-toxic Hardener

Surface Preparation

A. New Surfaces
• All surfaces must be clean, dry, and free from dust, dirt, chalk, laitance, efflorescence, rust, grease, oil, and other foreign materials.
• Wipe off oil and grease with solvent or lacquer thinner.
• Remove rust, mill scale, and stains with sandpaper, wire-brush, or other abrading methods.
• Treat iron surfaces with a heavy coating of rust and scale withDAVIES® 200-X Rust Converter wipe off residue and clean with lacquer thinner.
• Apply the appropriate metal primer immediately after cleaning and drying to avoid the onset of corrosion.

B. Previously Painted Surfaces
• if the existing paint is sound and shows slight chalking, sand lightly and wipe off dust
• Remove cracked, peeling off old paint by scraping, wire brushing, or sanding. Use
• DAVIES® 300-X Strip-Eze Paint Remover to aid in scraping off old paint.
• Treat heavily corroded surfaces with DAVIES® 200-X Rust Converter, wipe off residue, and clean with lacquer thinner
• Apply the appropriate metal primer immediately after cleaning and drying to avoid the onset of corrosion.

Painting System

Metal, Ferrous Surfaces
Primer/Sealer: Apply one (1) coat of DAVIES® Epoxy Primer White
Topcoat: Apply two (2) coats of DAVIES® Epoxy Enamel Non-Toxic White

Recoating interval: 4-6 hours

Drying Time: 8-10 hours

Clean-Up: DAVIES® 95 Epoxy Reducer

STORAGE AND HANDLING

• Keep the container closed when not in use.
• Store in a cool, dry and well-ventilated space.
• Do not transfer contents to other containers for storage.
• In case of spillage absorb with inert materials such as sand

Customers also bought:

Davies Epoxy Enamel White - Davies Paints Philippines, Inc.
Product Catalog
Filter Filter
Filters
    BF-50506
    Inner Calm
    [SSB counter="false" show_total_count="false"]