RECOMMENDED USE

Treatment for neutralizing masonry surfaces where alkalinity is
present

PAINTING INSTRUCTIONS

Application Tools :
Brush / Roller

Surface Preparation:
Allow new concrete to cure and dry completely for at least 28 days with a moisture content of less than 15% and a Ph level below 9.

Product Preparation:
Add 1 pint of DV-100-X Davies Concrete Neutralizer to 2 gallons of water, then stir thoroughly.

Application:
Apply by brush or roller until the surface is wet. Allow to dry for 24 hours, then brush off white crystals that will form on the surface.

Drying time: 24 hours

Clean-Up: Clean Water

CAUTION!
Keep away from heat and open flame. Use with adequate ventilation. Rubber gloves are strongly recommended for handling the solution. Avoid prolonged skin contact and repeated breathing of vapors. Wash skin immediately when it comes into contact.

STORAGE AND HANDLING

• Keep container closed when not in use.
• Store in a cool, dry and well-ventilated space.
• Do not transfer contents to other containers for storage.
• In case of spillage absorb with inert materials such as sand.